Lathem GPS Synchronization Receiver - LTR-GPS

Lathem LTR-GPS Satellite Receiver & Synchronizer

• The RS-485 output can directly synchronize up to 31 Lathem time products, up to 4,000 feet away, over a single twisted-pair cat-3 or cat-5 cable. The length of cable and number of synchronized devices can be further increased using Lathem's SWIFT485+. The supported devices for synchronization include:

• LTR Series Master Clocks (LTR0, LTR4, LTR8)
• DDC Series Digital Wall Clocks (DDC2, DDC4)
• Sonachron Bell Ringer (DWA-S)

• Configuration options include Local Time Zone, Daylight Savings Time option, and desired output format.
• LED's indicate signal reception and protocol mode.
• The LTR-GPS can be remotely powered from an LTR-512 Series Master Clock, using a second cable pair, if the distance is less than 200 feet. Otherwise, power is supplied locally by a 9VAC power adapter (included).

• LTR-GPS satellite synchronizer
• 115vAC, 2.7w, 50/60Hz power adapter
• Active GPS antenna with 25 foot cable
• Antenna mounting bracket and hardware